rubber metal bonding adhesive > BD801 rubber metal anti abrasion epoxy bonding adhesive

BD801 rubber metal anti abrasion epoxy bonding adhesive

BD801 wear abrasion high temperature resistant rubber metal epoxy bonding adhesive
(inflaming retarding type)

Product description of BD801 rubber metal high temperature anti wear abrasion resistant
bonding epoxy adhesives:
It’s the Brown viscous liquid,suitable for the self-adhesion and each-adhesion between rubber,leather,conveyor belt, metal, ceramics and wood,also used in the paste of wear resistant ceramic
rubber lining under general working condition.The peel strength of rubber-rubber is 110N/2.5cm,
the peel strength of rubber-metal is 28N/2.5cm.

How to use of BD801 high temperature abrasion wear resistant metal rubber epoxy bonding adhesive:
1.Matting on the surface of rubber,polishing rough on the metal surface to reveal the fresh substrates,
and clean it by cleaning agent(such as: ethyl acetate, acetone, alcohol, etc),dry it by airing.

2.After making main agent(A component) and curing agent(B component) mix uniformly according to ratio 10:1,
use hair brush to brush coating on the surface of metal and rubber separately for twice.When the adhesive solution dry
to have viscous force sense for the first time(use hand to touch like sticky inviscid),then brush coating for the second time,
after the adhesive solution of the second time drying to have viscous force sense(use hand to touch like sticky inviscid),
can make the rubber be bonding on the metal surface at this time,then compress it to be compacted
(generally knock it from the middle to all around with rubber hammer).Can’t do bank and forth movement after compaction.

3.Curing for 48 hours at the normal temperature can reach to the largest strength.

Notes:
1.This product contains organic solvent,should pay attention to ventilation during storage and using.

2.The adhesive should be matched between configuration and using,the configured adhesive should be used up
within 1 hours,can’t place for a long time.

3.The product storage period is 12 months at the temperature of 25 degree.

Product specification:
1Kg/group: A component: 910g,packed in a iron drum,B component: 90g,packed in a iron bottle.

Product packaging photo of BD801 high temperature anti wear abrasion resistant rubber metal bonding epoxy adhesives:

------分隔线----------------------------